Titanium pool heater with powers 3, 6, 9 and 12 kW mono
Caractéristiques : Vulcan
-
Fully equipped VULCAN heater
-
Easy installation
-
Robust and durable construction
-
Analog control thermostat with graduation 1°C
-
Titanium Resistors
-
BS 316 Stainless Steel Tube
-
Ultra reliable flow detector allows safe use from only 1000 liters/h
-
Swivel fixing element for floor or wall
-
Control thermostats and safety circuit breaker
-
3 year warranty subject to conditions
Construction du Vulcan
The VULCAN pool heater has been designed with premium materials and components at Elecro's factory in Hertfordshire, UK.
Il est composé d'un tube avec éléments d'entrée et de sortie d'un alliage de polymère spécial. Des adaptateurs universels ABS sont fournis pour le raccord aux tuyaux d'entrée et de sortie. L'élément de sortie comporte un détecteur de flux réversible avec une tige en titane et une lame en or.
The VULCAN heater is mounted on two swivel feet which allows vertical or horizontal mounting. The control elements are located on the front of the box.
The water inlet and outlet elements allow the connection of metric or standard tubes. The water inlet element has been designed to allow total immersion of the coils, which significantly reduces the risk of air pockets forming.
| ||1333
Utilisation des VULCAN
The desired temperature can be easily selected by turning the thermostat knob on the face of the case. 1 or 3 phase power supply is provided by a premiumSchneider contactor. The safety and protection of the equipment is ensured by the ultra-reliable flow detector. Protection against overheating is provided by the safety circuit breaker.
VULCAN Specifications & Models
Power supply: 230V single-phase, 400V three-phase
Débit minimum : 3-6-kW = 1m3/h / 9-15- kW = 4m3/h
Maximum flow rate: 17m³/ h
Maximum volume: 20 - 40 - 60 - 80 m³ of water
Resistances: Titanium, MgO compaction high
Tubes: Stainless steel BS 316
Analog control thermostat: 0>40°C (1° graduation C), safety circuit breaker 55°C (manual reset)
Flow detector: Contact blade covered with a thin layer of gold with titanium support pin| ||1374
Cablâge : At high temperature, silicone sheath, stranded copper conductors
Contactor: Schneider
Joints : Special high temperature polymer formula
Water connections: 1.5''BSp female connection, supplied with 1.5''50mm adapters for connection of ABS pipes
Pressure in operation: 4 bars maximum
Installation:Floor or wall mounting
Compliance with standards: European Electromagnetic Compatibility Directive 89/336/EEC and 93/068/EEC, EN 55014 - EN 55104, EN 5501, EN 5502, CEI 801-4, CEI 801 -2, IEC 801-3, European Low Voltage Directive 72/23/EEC, Harmonized standard EN 60335-2-35
VULCAN heater dimensions
