The Construction KIT for Traditional BETON Swimming Pool
Traditional construction par excellence, it is the most widespread construction technique, easy to implement and very economical, it allows you to build your swimming pool yourself, or call on just 1 mason thanks to our kit.
COMPOSITION OF THE CONSTRUCTION KITS for swimming pools with a traditional concrete structure:
The swimming lane construction kit,LUXE finish, includes quality equipment, from the biggest brands: RENOLIT-ALKORPLAN 2010 liner with protective varnish, KRIPSOL tank filter in Polyester / fiberglass, WITH filtering mass in GLASS filtration, KRIPSOL filtration pump, ASTRALPOOL sealing parts, piping and plumbing
|
|
Technical information
The kitconstruction kituction Béton, la réalisation de votre piscine !
The swimming pool in concrete kit or also called masonry swimming pool, is built following rules and methods of classic masonry similar to the construction of walls of a house.
Made either of normal concrete blocks (also called rubble), or reinforced formwork blocks, filled with concrete. It is obvious that the construction of a swimming pool must meet certain technical specifications which differ from the construction of a home.
This method of construction has the advantage of being very economical, but leaves little choice in the shape of the pool, which will necessarily be geometric.
Construction methods
The concrete blocks are assembled in the classic way with assembly mortar. (not included in the kit)
A structure composed solely of concrete blocks is not strong enough to resist the pressure of the water, the wall will have to be consolidated vertically and horizontally by a series of reinforcements in reinforced concrete, vertical pillars will be made at each corner and every two meters. This installation is done at the time of pouring the raft since the metal frames of the pillars are sealed in the concrete of the raft.
The pillars can thus be poured before or after erecting the walls.
The second construction method for traditional concrete swimming pools is the use of STEPOC type shuttering blocks.
The construction consists of mounting the blocks on the foundation, during construction, you integrate twisted irons on which the blocks will rest. The number of bars must therefore be equal to the number of cells in the blocks which will constitute the first row. If this is not the case, it is always possible to add iron in the base by drilling holes 8 mm in diameter and 15 cm deep using a perforator. We then drive in the irons with a hammer.
Each row of blocks to be reinforced being reinforced vertically and horizontally in order to stiffen the structure, once the walls are erected, all that remains is to pour the concrete at the heart blocks. A finishing level will be carried out on the last row of blocks.
|
|
|
With traditional construction, you can create several bases: flat, gentle slope, compound slope or even a diving pit.
For more information, do not hesitate to contact us for a tailor-made quote request.
Our KITS are offered in 1m50 structure height. We can provide you with a quote for different heights or dimensions.
Composition of the kit
Theparts to be sealed, first pas thefiltration!
The bottom drain Its main function is to allow the draining of the basin, it is, either in the large bath for diving pit pools, or in the center for flat bottom pools, it also allows the suction of heavier impurities falling to the bottom of the pool.
The Broom socket Its role is to allow the connection of the manual broom, but also of a hydraulic overpressure robot cleaner of the POLARIS type, it must be placed in the center of the length of the basin, sealed between 20 and 30 cm on the axis under the coping.
The Projector It allows you to illuminate your pool at nightfall in order to create another, more subdued atmosphere |
Les Refoulements They distribute the filtered water on its return to the basin, equipped with adjustable jets allowing the jets to be directed towards the surface, the number of backflow nozzles must be equal to or greater than the number of skimmer, (+ 1 generally), they are sealed between 35 and 50 cm below the axis of the part to be sealed under the coping.
The Skimmer Its function is to keep the body of water perfectly clean, its position will take into account the prevailing winds (always facing the prevailing winds), connected to the suction of the group of filtration it quickly absorbs so-called surface impurities, it seals between 2 and 4 cm below the coping.
The Auto Level Regulator. (OPTION) Its function is to automatically maintain the water level constant, by being connected to a water supply. |
In our luxury kit, you have the choice colors of the parts to be sealed:White, sand, light gray, dark gray. In addition we useLED technology (Wifi and remote control optional)
Composition of the kit
Thefiltration system, the quality ofbathing!
There are different filtration modes, sand, cartridge, diatom, outboard blocks. For our ECO & LUXE construction kits, you can find a traditional filtration system with sand filter.
The hydraulicity of a swimming pool is all the equipment which ensures the good circulation of water and contributes to its quality.
It will be carried out in such a way that the circulation of water operates correctly to ensure that the water is always of good quality.
In our LUXE kits we usea very good quality pump and filter. In addition, we replace the sand withfiltration glass which offers many advantages such asbetter filtration finesse
It will thus respect the 4 main rules:
Avoid dead zones.
Have an optimal flow rate in the circuit.
Evacuation of pollution as quickly as possible possible.
Ensure rapid and homogeneous diffusion of the disinfectant.
Operating principle of filtrationsimple:
The filtration pump filtration, once connected to the filter and connected to the filtration box, will suck up the water coming from the swimming pool.
It will suck up the water through the suction parts to be sealed, the or the skimmer and the bottom drain.
The water arriving from the different suction sources passes through the pump then into the sand filter: then passes through the filter mass generally made up of filtration sand , placed in the "bottle".
Two layers of sand with different grains are required, to improve the fineness of filtration.
Fine dirt is thus trapped in the sand , the water cleaned of impurities continues its path and returns to the basin before passing or not through the various optional treatment accessories such as pH dosing pump, salt electrolysis treatment...
Composition of the kit
Theliner, the waterproofingé by excellence !
Liner 75/100th with protective varnish: ALKORPLAN 2010
The liner is a flexible PVC membrane, extensible and waterproof, it adapts to all shapes pond. Its primary role is to ensure the waterproofing of your swimming pool, but its composition, its "structure" must be sufficiently permeable to allow management of the condensation phenomenon.
It is anti-UV, anti-algae treated, pleasant to the touch, its smooth surface offers easy maintenance and avoids any injuries, it offers several aesthetic and customization possibilities (frieze, etc.), economical, a liner is guaranteed for 10 years .
Composition of the kit
Swimming pool plumbing and hose kit
In our construction kit, all hydraulic connections, 50 m of hoses, rigid hose are included as well as PVC glue and stripper
Optional: The different possibilities for your staircase
The concrete masonry staircase
It is possible for you, on request and upon establishment of a specific, personalized estimate, to decorate your pool with a staircase, which you will make either in normal concrete blocks or in shuttering blocks.
A This occasion the estimate will be subject to a modification concerning the liner, as for the shape of the staircase.
Here are the shapes and prices:
The staircase to be installed on the liner
this type of prefabricated staircase is installed directly on the liner. They are often weighted with sand or with handrails.
This solution is very easy to install and you avoid the complication of installing a liner with stairs.
The acrylic staircase integrated into the structure
This type of staircase is integrated into the structure of your swimming pool, the liner does not cover the staircase, it is delivered with joints and flanges to ensure waterproofing on site.
Here are the shapes and prices: