Flocculation is a process for treating liquids. On contact, the flocculant transforms into flakes around which the suspended particles agglomerate and coagulate.
The physico-chemical reaction will clarify the liquid, this principle is used in swimming pools to improve the quality of the water, the suspended impurities will cling to each other and form a larger whole which is easier to filter .
Second interest, the water will clarify by becoming more transparent or limpid.
DirtiPool offers you a new range of treatment and disinfection products: DISTRICLEAR.
Specially designed and adapted to private swimming pools.
So that your swimming is a moment of pleasure without constraints.
Offered in two forms, in cartridge, for slow and permanent diffusion, or liquid for rapid action after an anti-algae treatment or to correct cloudy water. The flocculant under cartridge shape, placed directly in the skimmer basket, flocculation takes place when water enters the filtration system, agglomerated micro-organisms can thus be removed from the pool when passing through the filter . The role here of flocculant treatment is only complementary to the disinfectant treatment in place. This is a solution to consider if the filling water is naturally cloudy. It is essential to regularly check the clogging of your filter in fact with this process the filter finds itself in much greater demand so be careful when washing / backwashing / rinsing The flocculant in liquid form is ideal for one-off curative action. The liquid flocculant is poured directly into the pool, stop the filtration before pouring the liquid into the water, to be used after an anti-algae treatment in order to remove residues of dead algae in suspension. The particles, once agglomerated in layers of sediment, will settle at the bottom of the pool. At this point you will need to clean the bottom of your pool, with a robot cleaner or vacuum cleaner without going through filtration, directly into the sewer.
|
Solutions to Problems Encountered
Problems |
Causes |
Solutions |
Cloudy water |
pH élevé Insufficient Filtration Excess of impurities |
Analysis of the pH and adjustment between 7.2 and 7.6 Carry out a counter- washing the filter Carry out a shock chlorine treatment Addition of flocculant in granules or liquid |
Green water |
Presence
algae |
Brush
the walls and the bottom of the pool Analyze
the pH and adjust between 7.2 and 7.6 Carry out
a shock chlorine treatment Add
flocculant in granules or liquid |
Brown water |
Presence of iron or manganese |
Analyze the pH and adjust it between 7.2 and 7.6 Carry out shock chlorination Add flocculant in granules or liquid |
Limescale deposit |
Precipitation/reaction
limestone salts in water |
Analyze
the pH adjust it between 7.2 and 7.6 Add more
anti-limescale once a week until the deposit has completely disappeared |
Eye irritation and skin |
pH too low or too high Excess impurities |
Analyze the pH and adjust it between 7.6 and 7.2 Carry out a shock chlorine treatment |