Ei2 Salt Electrolyzer - COVER
Caractéristiques techniques
- Leds24 user interface.
Normal operating mode, Shutter mode (0-20%)
- Clock / Timer Slave to filtration
- Polarity inversion Yes: 5 h
- Recommended salt level - minimum 4 g/L - 3.0 g/L minimum
- Safety features
“Lack of salt” light: reduction of production to protect the electrode
“No flow” indicator: interruption of production until conditions are not optimal
Position of the cell Horizontal or vertical|| |1258
Tuyauterie compatible DN50 mm, DN63 mm, 1 1/2 (48 mm)
Protection index IPX5
Power supply 50 Hz 220-240 VAC (cable mains with molded socket)
Ei, how does it work?
Salt electrolysis is a simple principle. The water in the swimming pool is very slightly salty: 4g/l, i.e. 9 times less than sea water.
- The electrolyser is installed on the swimming pool filtration. By electrolysis, through the cell,the salt is transformed into chlorine, a powerful disinfectantinstantly dissolved in water.
- The chlorine produced helps fight bacteria, algae and micro-organisms.
- The chlorine eliminated under the effect of UV rays from the sun is constantly renewed by the cellwithout any intervention on your part.
Ei adapts to all types of swimming pools and coverings for existing swimming pools and small technical rooms. |
|
Why choose the Ei electrolyser?
For its simplicity: Simply drill two holes to install the cell, then connect its control box. Equipped with an LCD screen, its ergonomics have been designed forintuitive use.
For its longevity: Its Titanium electrodes inside the cell are fully coated with a proprietary alloy. A technical asset for increased longevity.
Always listening to users, the design of Ei was oriented towards a single watchword: simplicity from installation.