Digital Titanium pool heater 3 - 6 - 9 -12 kW

|| |1241

Features

• Fully equipped heater
• Easy installation
• Robust and durable construction
• Digital control thermostat with 0.5°C graduation
• Titanium heating elements
• BS 316 stainless steel tube
• Ultra reliable flow detector allows safe use from only 1000 liters/h
• Swivel mounting element for floor or wall
• Control thermostats and circuit breaker safety (manual reset)
• 3-year warranty subject to conditions

Construction

The heater has been designed with high-quality materials and components at the Elecro factory in Hertfordshire, UK.

It consists of a tube with inlet and outlet elements of a special polymer alloy. Universal ABS adapters are provided for connection to inlet and outlet pipes. The output element features a reversible flow sensor with a titanium stem and gold blade.

The heater is mounted on two swivel feet to allow wall or floor mounting. The control elements are located on the front of the case. The water inlet and outlet elements allow the connection of metric or standard tubes. The water inlet element has been designed to allow total immersion of the resistances, which considerably reduces the risk of air pockets forming.

Use

Simply press the buttons on the LCD screen to display temperatures. 1 or 3 phase power supply is provided by a premium qualitySchneider contactor. The safety and protection of the equipment is ensured by the ultra-reliable flow detector. Protection against overheating is provided by the safety circuit breaker (manual reset).

Specifications & Models

Power supply: 230V single-phase, 400V three-phase|| |1341

Débit minimum : 3-6-kW = 1m3/h / 9-15- kW = 4m3/h

Maximum flow rate: 17m3/h

Resistances: Titanium, high MgO compaction

Tubes: Stainless steel BS 316

Digital control thermostat: 0>40°C (graduation of 0.5°C), safety circuit breaker 55°C (manual reset)

Flow detector : Contact blade covered with a thin layer of gold with titanium support pin

Wiring: At high temperature, silicone sheath, stranded copper conductors

Contactor: Schneider

Joints:Special high temperature polymer formula

Connections water: 1.5''BSp female connection, supplied with 1.5''50mm adapters for connecting ABS pipes

Operating pressure: 4 maximum bars

Installation:Floor or wall mounting

Compliance with standards:European Electromagnetic Compatibility Directive 89/336/ EEC and 93/068/EEC, EN 55014 - EN 55104, EN 5501, EN 5502, IEC 801-4, IEC 801-2, IEC 801-3, European Low Voltage Directive 72/23/EEC, Harmonized standard EN 60335- 2-35

Dimensions