Ezarri Aquarelle swimming pool mosaic

Discover all the advantages of JointPoint technology from Ezarri!

Indeed, the JointPoint joint system from the manufacturer Ezarri is very advanced in terms of mosaic installation technology:

it allows simplified installation and gives a perfect result.

Because you should know that 92% of the surface of the mosaic remains completely free to receive the glue while the system does not react to humidity: unlike technologies based on a nylon or paper support, there will be no worries about destructive movements like expansion or retraction with JointPoint.

In addition, you can adjust JointPoint as you wish because it is at the same time flexible, strong and adjustable while allowing excellent control during installation which is shortened by 25% compared to traditional techniques.

Installation of mosaic on concrete

A simplified installation but terribly effective! First of all, you must ensure that the support which will receive the material is clean and does not have any reliefs. In addition, the humidity of this base must not exceed 3% in order to guarantee good durability of the installation over time.

If the support is concrete, the manufacturer advises you to use an adhesive with at least C2TE characteristics: do not hesitate to contact us if the material is different so that we can tell you the most suitable adhesive solution.

As for the joint to be used, an RG type epoxy is preferred.

By taking advantage of JointPoint technology combined with Ezarri panels, you will quickly obtain a perfect result: the alignment adjustment will be carried out by the simple use of a rubber float which will also allow you to remove excess gasket if necessary.

Then all you have to do is give the entire mosaic a clean coat using a sponge float.

After 24 hours of drying, you will use a work finisher to clean the entire site.