Pool Cartridge Filtration from 5.6 to 16 m³/h
For optimum use of your filter, it is advisable to place it on a stable and horizontal surface, once the pipe connections have been made, remember to tighten the cover flange, then simply open the water passage between the pump and the filter, check that all the valves in the circuit are open . Turn on the filtration pump, loosen the air vent at the top of the filter cover to release all the air inside then tighten.
For good maintenance of your swimming pool cartridge filter, remember to clean or replace the cartridge of your filter when the pressure gauge increases by 0.3 to 0.5 bars compared to the initial pressure, to do this stop the filtration pump , close all the valves in the circuit, remember to open the air vent, remove the drain plug at the bottom of the filter, in order to empty the water present in the filter, loosen the cover flange and remove the cover, you then just need to remove the cartridge, clean it with a garden hose, remove any debris and impurities in the bottom of the filter, once the cartridge is clean, put it back in place, replace the cover and the flange, screw the drain back on. bottom of the filter and restart your filtration.
