Polystyrene pool kit - DISTRIBLOC: BIO FILTER
Easy to assemble, speed of assembly of the structure, cutting and modularity of the ribs, the polystyrene block swimming pool construction kit will meet your most ambitious projects.
Technical information
Polystyrene kits DistriBloc will adapt to all yourdesires! Let's create your project together!
The DistriBloc Blocks have a material density of 25 Kg/m², a dimension of 1 x 0.25 x by a height of 0.25 meters, handling s It is particularly easy to find as its cutting allows you to adjust the desired dimensions of your future pool.
The smooth interior allows you to receive, after laying the felt, without having to carry out finishing coatings, the liner previously made by our partner factory after validation of the FINISHED dimensions of your pool.|| |
Corner caps for the corners are included for a professional finish ensuring the pouring of concrete without overhangs.
The polystyrene blocks have the capacity, by their constitution, to insulate the concrete walls, thus offering a significant heat gain measured between 2 and 4° C (depending on the region, the sunshine of the pool, if use of a bubble cover...) compared to a traditional swimming pool made of concrete and concrete blocks.
 |
 |
 |
 |
With Polystyrene blocks, several bottoms are possible, flat, gentle slope, compound slope or even pit dive.
The quantity of block depending on the choice of your background will be recalculated, as well as the liner.
For more information, do not hesitate to contact us for a request for a tailor-made quote according to your project.
Our KITs are offered in 1m50 structure height, on request we can provide you with a quote for a height depending on your project.
Composition of the kit
The OFILTRE filtration module: ecological and very quiet
The principle of basis of traditional filtration is respected for better mixing of pond water. In fact, on traditional filtration blocks or walls, the suction and discharge are done in the same place (which can be annoying on large swimming pools). On our module, the suction by skimmer(s) and bottom drain, discharges opposite the pool is respected. You should know that in the world of filtration, the greater the capacity of the filter element, the better the filtration will be and its clogging will be reduced. Our BIO FILTER blocks are equipped with a 6m3/h submersible pump with very low power consumption (70 W) and an oversized cartridge filter with a capacity of 40 m3/h. The filtration capacity is therefore 6 times greater than the standard.
The digital motors (made in Germany) have exceptional efficiency, they consume 5 times less electricity than a conventional filtration pump with equivalent flow (70 W). For example, a 0.50 HP pump which delivers 6 m3/h will consume around 370 W... Or an annual cost of around 167 . With our pump, you will consume 31.... Let's take another example, on a 50 m3/h swimming pool, you will have to install a 1 HP pump or 750 W. An estimated consumption of 339. Against 62 for our 2 digital motors. As you will have understood, the cost of the filter module will be amortized very quickly. The consumption of our digital pump is so low that a simple solar panel (optional) is enough to power the pump. Finally, it is not necessary to consume hundreds of liters of water to clean your filter.
Knowing that a Bio Filter block is installed very simply (no installation in a technical room, no valves, no fittings, very few pipes, etc.), the final cost is more advantageous for an equipped swimming pool of a single module and practically equivalent if there are 2 modules in your pool. (Not counting the cost of building a technical room if you don't have one!)
Composition of the BIO FILTER filtration module:
1 digital pump of 6 m3/ h of 70 W
1 Hayward cartridge filter of 40 m3/h.
1 skim filter type pre-filter for double filtration.
Connections.
Optional : électrolyseur au sel, lampe LED couleurs, pompe à chaleur.
The digital motor which equips the pumps as well as its submerged position in the module allows completely silent operation. The digital motor which equips the pumps as well as its submerged position in the module allows completely silent operation
Composition of the kit
Theliner, seals ité by excellence !
Liner 75/100th with protective varnish: ALKORPLAN 2010
The liner is a flexible PVC membrane, extensible and waterproof, it adapts to all pool shapes. Its primary role is to ensure the watertightness of your swimming pool, but its composition, its "structure" must be sufficiently permeable to allow management of the condensation phenomenon.
It is anti-UV, anti-algae treated, pleasant to the touch, its smooth surface offers easy maintenance and avoids any injuries, it offers several aesthetic and customization possibilities (frieze, etc.), economical, a liner is guaranteed for 10 years .
In our construction kit, the liner in the colors presented is included, the rot-proof felt to stick to the structure before installing the liner, the felt glue and the HUNG fixing rails.
Optional: The different possibilities for your staircase
The staircase made of polystyrene block
It is possible for you, on request and upon establishment of a specific, personalized quote, to decorate your pool with a staircase, which you will make either in polystyrene block.
On this occasion the quote will be subject to a modification concerning the liner, as for the shape of the staircase.
Here are the shapes and prices:
The staircase to be placed directly on the liner
this type of prefabricated staircase installed on the covering directly. They are often weighted with sand or with handrails.
This solution is very easy to install and you avoid the complication of installing a liner with stairs.
The acrylic staircase integrated into the structure:
This type of staircase is integrated into the structure of your swimming pool, the liner does not cover the staircase, it is delivered with gaskets and flanges to ensure sealing on site.
Here are the shapes and prices:
