Flippy BY AQUALUX above ground pool pump
Livré avec fiche moulée sur câble de 1.5 m pour une mise en route facile et rapide
Install the pump next to the swimming pool ( 3.5 ml). - Protect the pump with a 30 mA differential device. - Maintain the water level at 2/3 of the height of the skimmers. - Dismantle and store the pump in a dry place during winter storage. - Do not operate the pump without water. - Empty the pre-filter regularly. - Allow: 210 mm of clearance above the pre-filter. 50 mm clearance behind the fan - Install the pump next to the pool ( 3.5 ml). - Protect the pump with a 30 mA differential device. - Maintain the water level at 2/3 of the height of the skimmers. - Dismantle and store the pump in a dry place during winter storage. - Do not operate the pump without water. - Empty the pre-filter regularly. - Allow: 210 mm of clearance above the pre-filter. 50 mm of clearance behind the fan
- The ¼ turn cover allows quick access to the basket
of pre-filter for quick cleaning, just a few seconds
are enough.
- The transparent cover allows you to view
immediately fill the pre-filter and do not
clean only if necessary.
- Quieter thanks to the foot which allows you to properly support the
pump on its support
- The bleed screw allows the pump body to be emptied and
protect it during wintering. |
|
Flippy above ground pool pump technical sheet By AQUALUX
PRO advice: FLIPPY installation
Install the pump next to the swimming pool ( 3.5 ml). - Protect the pump with a 30 mA differential device. - Maintain the water level at 2/3 of the height of the skimmers. - Dismantle and store the pump in a dry place during winter storage. - Do not operate the pump without water. - Empty the pre-filter regularly. - Allow: 210 mm of clearance above the pre-filter. 50 mm clearance behind the fan - Install the pump next to the pool ( 3.5 ml). - Protect the pump with a 30 mA differential device. - Maintain the water level at 2/3 of the height of the skimmers. - Dismantle and store the pump in a dry place during winter storage. - Do not operate the pump without water. - Empty the pre-filter regularly. - Allow: 210 mm of clearance above the pre-filter. 50 mm clearance behind fan
Optional: Integrated TIMER