OFILTRE swimming pool filtration monobloc unit
Voici la collection de bloc de filtration OFILTRE. Une nouvelle filtration dans le respect de la tradition. En effet Ofiltre a mis au point une filtration monobloc équipée d'un local technique derrière la structure avec un filtre à sable. Ce type de filtration offre de nombreux avantages :
1 floating skimmer 180° high and low suction
2 discharge nozzles, 1 broom socket.
1 WHITE LED projector 400 lumens (color optional)
1 background suction.
1 front block in reinforced polyester with GEL COAT marine Vinylester finish
Optional: Light gray or sand (submerged block + local cover)
A technical room equipped:
1 3/4 CV ESPA pump.
1 ACIS sand filter diam 650 mm of 16 m3/h.
PVC connection pressure 16 bars
Fixed wall crossing aimed at waterproof FF (sewer and heat pump)
Complete scalable electrical box with 30 MA differential
PLEXO box, cover with lock, reinforced polyester block
Optional: By pass, PH regulator, salt electrolyser, color LED lamp, variable speed pump, connected module ON.E
Please note if you order our formula with PH regulator, you must order an optionaltechnical room for the PH canister
A The disadvantages of monoblock filtration are that the basic principle of filtration is not respected. In fact you must normally have a surface suction (skimmer) and a low suction (bottom drain). With our filter unit, this principle is respected thanks to the low suction. Then you must have the skimmers on one side and the discharges on the opposite side in order to create better mixing of the water. This is not possible on a filtration block but Ofiltre has positioned its discharges on each side of the block in order to find this basic principle.
Dimensions of the O'filtre filtration unit
ZOOM on the installation of the O'FILTRE filtration blocks
Here is the standard installation configuration of your O'FILTRE filtration block
To perfectly align the level of the cover to your paving, wooden terrace, etc. of your outdoor areas. You must specify the H dimension to communicate when ordering. See diagram below.
Zoom on the options
By pass kit: It is mounted by the manufacturer in the room: 1 valve + 2 tees + 2 wall crossings ( be careful to provide 2 additional valves on the heat pump: not supplied)
Color block: Available in light gray or sand: Only the submerged block + the cover of the technical room .
PH regulator: this is only the room which will house your PH container, the PH regulator, the PH container is not included
