The KIT of Polystyrene Construction - DISTRIBLOC
Ease of assembly, speed of assembly of the structure, cutting and modularity of the dimensions, the swimming pool construction kit in polystyrene block will be able to respond to your most ambitious projects.
Technical information
The DistriBloc Polystyrene kits will adapt to allyour desires! Let's create your project together!
The DistriBloc Blocks have a material density of 25 Kg/m², a dimension of 1 x 0.25 x by a height of 0.25 meters, handling s It is particularly easy to find as its cutting allows you to adjust the desired dimensions of your future pool.
The smooth interior allows you to receive, after laying the felt, without having to carry out finishing coatings, the liner previously made by our partner factory after validation of the FINISHED dimensions of your pool.|| |1361
Des bouchons d'angles pour les coins son inclus pour une finition professionnelle assurant le coulage du béton sans débords.
The polystyrene blocks have the capacity, by their constitution, to insulate the concrete walls, thus offering a significant heat gain measured between 2 and 4° C (depending on the region, the sunshine of the pool, if use of a bubble cover...) compared to a traditional swimming pool made of concrete and concrete blocks.
 |
 |
 |
 |
With Polystyrene blocks, several bottoms are possible, flat, gentle slope, compound slope or even pit dive.
The quantity of block depending on the choice of your background will be recalculated, as well as the liner.
For more information, do not hesitate to contact us for a request for a tailor-made quote according to your project.
Our KITs are offered in 1m50 structure height, on request we can provide you with a quote for a height depending on your project.
Composition of the kit
Theparts to be sealed, first pas offiltration!
The Skimmer
Its function is to keep the body of water perfectly clean, its position will take into account the prevailing winds (always facing the prevailing winds), connected to the suction of the filtration group it quickly absorbs so-called surface impurities, it is sealed between 2 and 4 cm under the coping.
Les Refoulements
They distribute the filtered water on its return to the pool, equipped with adjustable jets allowing the jets to be directed towards the surface, the number of backflow nozzles must be equal to or greater than the number skimmer, (+ 1 generally), they are sealed between 35 and 50 cm below the axis of the part to be sealed under the coping.
The broom socket
Its role is to allow the connection of the manual broom, but also of a hydraulic overpressure robot cleaner of the POLARIS type, it must be placed in the center of the length of the pool, sealed between 20 and 30 cm from the axis under the coping.|| |1464
La Bonde de fond
Its main function is to allow the pool to drain, it is either in the large bath for pools with diving pits, or in the center for pools with flat bottom, it also allows the suction of heavier impurities falling to the bottom of the pool.
The Projector
It allows you to illuminate your pool at nightfall in order to create a another more cozy atmosphere, in our PREMIUM kit, we put 300 W halogen technology, it seals between 45 and 55 cm under the coping.
Please note, provide a sufficient length of cable to change the bulb outside some water !
Composition of the kit
Thefiltration system, the quality ofbathing!
It There are different filtration modes: sand, cartridge, diatom, outboard blocks. For our PREMIUM & LUXE construction kits, you can find a traditional filtration system with sand filter.
The hydraulicity of a swimming pool is all the equipment which ensures the good circulation of water. water and contribute to its quality.
It will be carried out in such a way that the circulation of water operates correctly to ensure that the water is always of good quality.
It will thus respect the 4 main rules:
Avoid dead zones.
Have optimal flow in the circuit.
A evacuation of pollution as quickly as possible.
Ensure rapid and homogeneous diffusion of the disinfectant.
Operating principle of filtrationsimple:
The filtration pump, once connected to the filter and connected to the filtration box, will suck up the water coming from the swimming pool.
It will suck up the water through the parts to seal the suction, the skimmer(s) and the bottom drain.
The water arriving from the different suction sources passes through the pump then into the sand filter: then passes through the filter mass generally made up of filtration sand, placed in the "bottle".
Two layers of sand with different grains are to be provided, to improve the fineness of filtration.
Dirt fines are thus trapped in the sand, the water cleaned of impurities continues its path and returns to the basin before passing or not through the various optional treatment accessories such as pH dosing pump, salt electrolysis treatment, etc.| ||1562
Composition du kit
Theliner, waterproofingé by excellence !
The liner is a flexible PVC membrane, extensible and waterproof, it adapts to all pool shapes. Its primary role is to ensure the watertightness of your swimming pool, but its composition, its "structure" must be sufficiently permeable to allow management of the condensation phenomenon.
It is anti-UV, anti-algae treated, pleasant to the touch, its smooth surface offers easy maintenance and avoids any injuries, it offers several aesthetic and customization possibilities (frieze, etc.), economical, a liner is guaranteed for 10 years .
In our construction kit, the liner in the colors presented, the rot-proof felt to be glued to the structure before installing the liner, the felt glue and the HUNG fixing rails are included.
It is possible for you, on request and upon establishment of a specific, personalized quote, to decorate your pool with a staircase, which you can make in DistriBloc polystyrene blocks during the construction period of your pool.
On this occasion the quote will be subject to a modification on the quantity of blocks and on the liner, directly impacted by this tailor-made production.
