Where can you put the solar collectors?
Partout ou vous obtenez aux moins 6 heures d'ensoleillement dans la journée. Plus les capteurs seront au soleil, plus ils fonctionnent bien... SI vous montez les capteurs solaires en angle ( support ou toit ), pensez à les positionner vers le Sud.
|
|
1. The water returning to the pool will be a few degrees (between 3 and 5°C) warmer than the pool itself. The circulation of the water will allow you to gain a few degrees with each pass. 2. Circulate water through the solar collectors at least 6 hours a day during the sunny hours of the day. If you circulate at night, when the weather is overcast or cool, you will cool the pool rather than heat it up. If you need to run your pump at night, divert the flow thus bypassing the solar collectors. use the 3-way By-pass valve to direct the flow of water according to the sun.
|
Connection kit in the kit
|
|
1: O-rings (x 2) 2: Silicone lubricant (x 1) 3: serflex stainless steel 1"1/2 ( x 2) 4: serflex stainless steel 1"3/4 (x 2) 5: Small elbow 6: large elbow |
SOLAR COLLECTOR INSTALLATION DIAGRAM
| POOL VOLUME | Distri-Sun Unit |
| 10 to 18 m3 | 2 rooms |
| 19 à 25 m3 | 3 rooms |
| 26 to 40 m3 | 4 rooms |
| 41 to 70 m3 | 5 pièces |
|
|
3-way valve kit + roof kit OPTIONAL
|
