SCUBA II swimming pool water photometer

Our services

1 year warranty
Delays 3 to 4 days
Payment in 3 installments

Visualization

Video

SCUBA II photometer





Each owner of a private swimming pool must regularly check the most important parameters of swimming pool water.

This is the only way to guarantee excellent water quality and to carry out an optimal dosage of water treatment products.

The SCUBA II allows you to quickly and precisely control the water quality of your swimming pool.

Simply immerse the device in the water and the chamber Integrated measure fills with pool water.

The addition of a reagent tablet provides a characteristic coloring which will be measured according to the photometric principle and displayed as a measurement value.

Five parameters are measured within a few minutes; Chlorine in its free form, total chlorine, pH, TAC (alkalinity), stabilizer or cyanuric acid.

Water analysis becomes fun and the fun of swimming can begin.

If the SCUBA II should inadvertently fall into water, no worries, it floats and is of course waterproof. Let this little tester convince you, the safety of bathing in

properly balanced water with perfect hygienic characteristics is priceless.








149,00

SCUBA II

analyse-eau-photometre-scuba-II

Practical information:


- Works with 2 batteries (AAA) approximately 500 measurements.

- Waterproof, it floats if you drop it in the pool.

- Does not weigh only 165 grams with batteries.

- Automatically turns off after 5 minutes of non-use.

- Operates from 5 to 40°c


Contents of the kit:

- Scuba II in its box.

- 20 DPD 1 and Phenol Red tablets for photometer

- 10 DPD 3 tablets, stabilizer and alkalinity test-M

- 2 batteries

- Agitator

- Instructions for use


Measuring ranges:

Free chlorine: from 0.1 to 6mg/l

Total chlorine : from 0.1 to 6mg/l

pH: from 6.5 to 8.4

Stabilizer: from 1 to 160mg/l

alkalinity: from 0 to 300mg/l (CaCO3)


photometre-piscine-scuba