NANO above-ground pool electric pool heater |
|
NANO Features
-
Fully equipped NANO heater
-
Easy installation
-
Robust and durable construction
-
Analog control thermostat with graduation of 1°C
-
Stainless steel resistors (not compatible with salt treatment)
-
BS 316 stainless steel tube
-
Ultra reliable flow detector allows use safe from only 1000 liters/h
-
Swivel fixing element for floor or wall
-
Control thermostats and safety circuit breaker (manual reset)
-
2-year warranty subject to conditions
Construction: NANO
The NANO pool heater was designed with superior quality materials and components in the Elecro factory in Hertfordshire in the United Kingdom.
It consists of a tube with inlet and outlet elements of a special polymer alloy. Universal ABS adapters are provided for connection to inlet and outlet pipes. The output element features a reversible flow sensor with a titanium stem and gold blade.
The NANO heater is mounted on two swivel feet to allow wall or floor mounting. The control elements are located on the front of the case. The water inlet and outlet elements allow the connection of metric or standard tubes. The water inlet element has been designed to allow the total immersion of the resistances, which considerably reduces the risk of air pockets forming.
Use of NANO
La température désirée peut se sélectionner facilement en tournant le bouton du thermostat sur la face du boîtier. La sécurité et protection du matériel est assurée par le détecteur de flux ultra fiable. La protection contre une surchauffe est assurée par le disjoncteur de sécurité (réarmement manuel).
NANO Specifications & Models
Power supply: 230V single phase, 400V three phase
Minimum flow rate: 1 m3/h
Maximum flow rate: 17m3/h
Tubes: Stainless steel BS 316
Control thermostat analog: 0>40°C (graduation of 1°C), safety circuit breaker 55°C (manual reset)
Flow detector: Contact blade covered with a thin layer of gold with titanium support pin
Wiring: At high temperature, silicone sheath, multi-stranded copper conductors
Contactor: Schneider
Seals:Special high temperature polymer formula
Water connections: 1.5''BSp female connection, supplied with 1.5''50mm adapters for connecting ABS pipes
Operating pressure: 4 bars maximum
Installation : Floor (horizontal) or wall (vertical) mounting - upward flow detector.
Compliance with standards: European Electromagnetic Compatibility Directive 89/336/EEC and 93/068/EEC, EN 55014 - EN 55104, EN 5501, EN 5502, IEC 801-4 , IEC 801-2, IEC 801-3, European Low Voltage Directive 72/23/EEC, Harmonized standard EN 60335-2-35
NANO heater dimensions
NANO heater installation diagram
