Two-Component Glue 13.3 kg - Distripool

Colle Bi-Composante 13.3 kg

Our services

10 year warranty

Deadlines 3 to 4 days

Payment in 3 installments

Ideal for use in gardens, green spaces and swimming pool edges...

If you have decided to install your own artificial grass , then you need two-component glue for the connections between the strips. James Grass glue is designed for this purpose, it will ensure long-term bonding and even in the most hostile climatic conditions.

This two-component glue for synthetic turf, green in color, can be used for all floor coverings, both outdoors and indoors.

Recommended quantity : 1 kg = 2 m²

Pre-dosed hardener in sachet, very easy to use

Quickly made resin-hardener mixture

Easy application with a spatula lasting45 mins

Shelf life:2 years in its original, unopened packaging and stored at +10°C and + 30 °C

Brand : James Grass

74^,76 €

“Step by step” installation instructions

1- Surface preparation

Préparez votre sol de façon à avoir une surface à peu près lisse, les vallons et les grands creux peuvent être plus esthétiques. Un traitement herbicide est recommandé au préalable. Nivelez la terre de façon à éviter les bosses et les trous. Si votre sol est très caillouteux, étalez une fine couche de sable.

2- Laying the grass

It It is important that the strips of grass are always rolled out in the same direction during installation, whatever the surface, so that the strands are oriented in the same way.

pose1 pose2

| ||1214

Bien mettre en place le gazon pour éviter des plis. Découpez les parties extérieures à laide dun cutter.

pose3 pose4

Fix the edges of the strips with nails ( 140 mm high approximately) every 30 cm to 40 cm on all peripheries.

pose5 pose6

3 - Maintenance

In places of frequent traffic, where natural grass would tend to deteriorate, synthetic grass will just need a quick sweep of a road sweep to be straightened.