Pre-glued joint tape - Distripool

Bande de jointure pré-encollée

Our services

10 year guarantee

Deadlines 3 to 4 days

Payment in 3 installments

Ideal for use in gardens, green spaces and swimming pool edges...

Pre-glued polyurethane joint strip for synthetic grass, ready to use! It will allow you to connect two lengths of synthetic grass very easily.

In addition, thanks to this pre-glued joint strip, your installation will be simpler and cleaner.

Weight : 1.650 kg/m²

Thickness: 1.45 mm

Temperature resistance: - 40°C and + 90°
| ||1071

Marque : James Grass

14^.95 €

“Step by step” installation instructions

1- Surface preparation

Prepare your ground so that you have a relatively smooth surface; valleys and large hollows can be more aesthetically pleasing. A herbicide treatment is recommended beforehand. Level the land to avoid bumps and holes. If your soil is very stony, spread a thin layer of sand.

2- Laying the grass

It It is important that the strips of grass are always rolled out in the same direction during installation, whatever the surface, so that the strands are oriented in the same way.

pose1 pose2

| ||1223

Bien mettre en place le gazon pour éviter des plis. Découpez les parties extérieures à laide dun cutter.

pose3 pose4

Fix the edges of the strips with nails ( 140 mm high approximately) every 30 cm to 40 cm on all peripheries.

pose5 pose6

3 - Maintenance| ||1247

In areas of frequent traffic, where natural grass would tend to deteriorate, synthetic grass will just need a quick sweep of a roadmender's broom to be straightened.| ||1252